Hotsy Model 333 Hot Water Pressure Washer


Innovative & User-friendly

Competitively priced entry class hot water high-pressure cleaner. Innovative upright design ensures good mobility and ergonomics. Very user-friendly with one switch operation and areas for hose and accessory storage.
  • Oil-Fired
  • 1.7 GPM
  • 1200 PSI
  • 2.3 HP
  • 115V/1PH
  • Direct-Drive Axial Pump
  • Many options to make industrial cleaning faster and easier!
  • Heater coil carries a 5-year warranty
  • Axial pump carries a 7-year warranty
  • 33-ft high pressure hose
  • Safety lock prevents fuel loss during transport
  • Large fine mesh filter protects against dirt particle damage in burner fuel system
  • Exhaust temperature sensor offers protection against overheating
  • Auto start/stop protects pump when trigger gun is not in use
  • Efficient heat exchanger for low exhaust emissions and minimal operating costs
  • Downdraft burner is 92% efficient and offers 25% less fuel consumption
  • Tilting aid for easy transport; can be moved in a horizontal position within compact vehicles
  • Easy control panel centrally located with three modes Off/Cold/Hot
  • Model: 333
  • PN: 1.064-049.0
  • GPM: 1.7
  • PSI: 1200
  • HP: 2.3
  • VOLT/PH: 115/1
  • AMP: 12.5
  • FUEL: Oil
  • BTU/HR: 80,000
  • PUMP: Axial
  • DRIVE: Direct
  • HOSE: 33’
  • SHIP WT (lbs): 178
Part No.Description
2.642-305.0Gutter cleaning lance
4.760-245.0Underbody lance
9.112-508.021″ wand with quick connect female threads
9.802-220.021″ wand with quick connect male threads
6.389-479.0High-pressure hose, 10m DN8, extension piece
6.390-028.0Pipe cleaning hose
8.739-132.0100′ hose, 3/8″ ID, 1-wire, 3000 PSI, 275o
4.762-010.0Wet blasting attachment
2.638-526.0Nozzle kit for wet blasting attachment
2.640-482.0Nozzle kit for surface cleaner FR
2.883-803.0Power nozzle 25o spray angle
4.767-001.0Triple nozzle, touchless changeover
4.767-022.0Dirtblaster, small
4.767-230.0Dirtblaster nozzle 035
3.637-170.0Detergent injector for high pressure
4.775-526.0Servo-press controller, less than 3.3 GPM
5.394-294.0Spacer (incl. nozzle union)
6.401-459.0Plug nipple