Waste Oil Heaters and Boilers

Superior Heating Solutions

Waste oil heaters and boilers allow excess to be used as fuel for little to no cost. Eliminate the need to pay to have your waste oil hauled away or recycled! The use of waste oils on-site in a waste oil heater is an approved method of recycling by the Environmental Protection Agency (EPA).

The ideal heating solution for manufacturing, trucking/transportation, marine, and more!

Quality manufacturers we partner with include:

  • Energy Logic
  • Fire Lake
  • Clean Energy

NEED MORE INFORMATION? CONTACT CENTRAL CLEANING SYSTEMS TODAY!

Featured Models

Stainless Steel Heat Exchanger

Designed to prevent corrosion, warping and weld breakage.
Built to last decades, not years.

Accutemp Preheater

Rapidly heats the widest range of
viscosities of used oil, synthetic oils
and other acceptable fuels.

Integrated Air Compressor

Built in so you don’t have to connect to and
rely on shop air. Providing 24/7 heating
availability

Side Suction
Metering Fuel
Pump

Reliable, consistent fuel delivery regardless of fuel type (up to 90W) with no manual adjustments

Low Fuel Cut Off

Turns off the furnace before running out of fuel — preventing time-consuming troubleshooting, shutdowns and repriming.

*included with fuel delivery kits, complete systems and with furnace only

Elevated Fuel Pick Up

1) Pump can be mounted at the fuel source—instead of on top of the tank—so the pump is flooded with used oil, not air!

2) Fuel pick up is six inches above the bottom of the tank, above water and sludge, ensuring only used oil is sent to the furnace.

3) Easy spin-on stainless mesh filter.

Swing Away Burner and Ash Removal Port

This convenient combination makes cleaning the chamber faster and easier than any other brand. One tool, 30 minutes or less.

Fuel Gauge

Visual indicator of how much used oil is in your tank.

Digital Hour Meter

Tracks runtime

Flame Retention Head

This patented design creates a hotter flame than competitor brands for complete fuel combustion and highest heat output. Less ash is produced resulting in longer maintenance intervals than competitor brands.

Drain Valve

Makes it simple to purge water
or other contaminants that naturally settle in the bottom of the tank.

Class A Flue Kit

Stainless steel interior, double-wall flue kits are UL-listed and meet local codes.

*standard for complete system or sold separately.

Featured Models

CE-180 Waste Oil Furnace

Our CE-180 Waste Oil Furnace is a cost-effective and eco-friendly way to heat mid-sized spaces.

With up to 170,00 BTUs of heating power coupled an innovative new furnace design, the CE-180 will help your business start saving money immediately.  And by helping to dispose of used petroleum products cleanly and safely, it’s a smart way to generate free heat for your facility.

Included with the furnace:

• Stainless steel heat exchanger
• Preassembled metering pump
• Clean Energy burner
• Direct drive blower w/ 3/4hp motor
• Inline oil filter w/gauge
• Barometric damper
• Digital wall thermostat

Features

• High velocity, stainless steel, air swept heat exchanger
• Vertical, stainless steel flue tubes
• Over-center latches on clean-out doors
• Left or right side chimney outlets
• Tank, wall or ceiling mountable
• 1000+ hours cleaning interval
• Limited lifetime warranty
• Made in the USA

Specifications

• 175,000 BTU/hour input
• 1.2 GPH max fuel consumption
• 1,700/80° F air flow output CFM/heat rise
• 115 VAC, 60 Hz, single phase, 20 amp breaker
• UL and cUL Listed
• Hanging weight 470 lbs.
• 6″ diameter stack outlet

CE-250 Waste Oil Furnace

Ou CE-340 Waste Oil Furnace is an eco-friendly furnace that’s been designed to inexpensively heat large spaces.

Featuring out patent-pending design advances plus up to 245,000 BTUs of heat output, the CE-250 is a powerful yet cost effective way to heat warehouses, garages and other large spaces.  Best of all, by turning used motor oil into free heat, it’s as eco-friendly as it is cost-effective.

Included with the boiler:

• Stainless steel heat exchanger
• Preassembled metering pump
• Clean Energy burner
• Direct drive blower w/ 1hp motor
• Inline oil filter w/gauge
• Barometric damper
• Digital wall thermostat

Features

• High velocity, stainless steel, air swept heat exchanger
• Vertical, stainless steel flue tubes
• Over-center latches on clean-out doors
• Left or right side chimney outlets
• Tank, wall or ceiling mountable
• 1000+ hour cleaning interval
• Limited lifetime warranty
• Made in the USA

Specifications

• 245,000 BTU/hour input
• 1.7 GPH max fuel consumption
• 2,400/90° F air flow output CFM/heat rise
• 115 VAC, 60 Hz, single phase, 30 amp breaker
• UL and cUL LIsted
• 6″ diameter stack outlet
• Hanging weight 515 lbs.

 

CE-330 Waste Oil Furnace

Our CE-330 Waste Oil Furnace is the largest furnace in our line.  It’s the perfect choice to quickly and cost-effectively heat the largest spaces.

An innovative new furnace design combined with up to 325,000 BUTs of heating power makes the CE-330 a smart investment.  It has the power to heat very large spaces, and by turning used oil products into free heat it can help your business start saving money immediately.

Included with the furnace:

• Stainless steel heat exchanger
• Preassembled metering pump
• Clean Energy burner
• Blower w/2hp motor
• Inline oil filter w/gauge
• Barometric damper
• Digital wall thermostat

Features

• High velocity, stainless steel, air swept heat exchanger
• Vertical, stainless steel flue tubes
• Over-center latches on clean-out doors
• Left or right side chimney outlets
• Tank, wall or ceiling mountable
• 1000+ hours cleaning interval
• Limited lifetime warranty
• Made in the USA

Specifications

• 325,000 BTU/hour input
• 2.3 GPH max fuel consumption
• 3,700/85° F air flow output CFM/heat rise
• 230 VAC, 60 Hz, single phase, 30 amp breaker
• UL and cUL Listed
• Hanging weight 625 lbs.

CE-340 Waste Oil Boiler

Ou CE-340 Waste Oil Boiler brings cost-saving waste oil technology to hydronic heating systems.

Featuring many of the same design innovations found in our line of waste oil furnaces, the CE-340 boiler allows businesses to create free hot water for radiant heat or other purposes by burning waste oil.  It’s clean, safe and guaranteed to cut costs when compared to traditional hydronic heating systems.

Included with the boiler:

• Clean energy burner
• • Preassembled metering pump
Inline oil filter w/gauge
• Digital wall thermostat
• Damper
• Boiler controls

Features

• Easy Clean out – Front and rear doors open for straight through cleaning without removing stack
• Wet base fire tube boiler will reduce hot spots and deterioration
• 16 – 2.5 diameter flue tubes
• ASME Certified
• UL and cUL Listed
• Optional domestic hot water coil

Specifications

• 2.4 GPH fuel flow rate
• 335,000 BTU/hr input (approx.)
• 275,000 BTU/hr output (approx.)
• 65 gallon boiler water volume
• Supply 2″ NPT / Return 2″ NPT
• 8″ exhaust stack
• Requiring 2.5 CFM @ 25 PSI compressed air
• 115V / 60 Hz 20 AMP electric
• Boiler weight (dry) 1000 lbs.
• Standard relief valve setting 30 psi
• Heating surface 62 ft2

Acceptable fuel: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils.

CONTACT US
USE THE FORM BELOW OR CALL US DIRECT FOR FAST SUPPORT

14 + 11 =

Central Cleaning Systems

Address:
1425 S. Graham Rd Saginaw, MI 48609
1234 Otsego Ave. Gaylord, MI 49735

Phone:
(989) 607-4836